| Customization: | Available |
|---|---|
| Material: | Po |
| Transparency: | Transparent |
|
Still deciding? Get samples of US$ 0.5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hot Melt Film use as Backing or Topping
Description
Hot Melt Film is made of environmentally friendly material and it has the characteristics of season resistance, washing resistance and dry cleaning resistance. This film dissolves when heated by hot dry iron.
Material: PO
Thickness: 60um, 80um, 100um, 120um, etc.
Max width: 100cm
Features &Comments
1. Preheating the machine before you use it and at the same time adjust a suitable temperature. (In general, the recommend application temperature is range from 90ºC to 135ºC. However, the application temperature is related to the material, thickness and emblem, so please kindly have a test first.)
2. Put the pieces of the emblem or the finished embroidery on the Manual Heat Transfer machine.
3. One side with glue should be put on emblem and the other side with release paper should be placed on the heating plate of the machine.
4. Ironing time: About 5-20 seconds, which is also, depend on the material and the thickness of the glue, so it can be determined after a test. After ironing of 5 to 20 seconds, loosen the machine and tear off the release paper. When it cools, the emblem has a layer of glue called adhesive and the emblem itself becomes adhesive emblem.
5. Cutting the excessive part by clip tool or by hand.
6. Laying the side with the glue of the emblem on the garment and the emblem can stick to garment by the Manual Heat Transfer machine.
7. It is more efficient than traditional stitching method, strong viscous, and washable.
){kind=link}